Price:
$25.99
Wheel
Durable 10 inch air-filled rubber wheel fits 5/8 inch axels on hand trucks and carts.
About the EZ Roll Pneumatic Wheel
The EZ Roll Pneumatic Wheel features 4-ply rubber layering for strength and durability. The advantage of a pneumatic wheel is that it provides a smooth ride because they are air filled just like a car tire. This is an ideal replacement wheel for virtually any hand truck that has a 5/8 inch axle. Zirk fitting allows you to easily grease the hub as necessary. Load capacity is rated at 350 lbs.
Material
Rubber
Bearings
Ball
Load Capacity (lbs.)
350
Type
Pneumatic
Brand
EZ Roll
Hub Type
Steel
Tread Width
2.5 in.
Axle Bore Size
5/8 in.
Wheel Size
10 in.
Hand truck wheels are fully assembled. Simply remove your old wheels and replace with the new wheels. Use the existing cotter pins or replace with new pins if necessary.
REVIEW SNAPSHOT®
by PowerReviews(based on 22 reviews)
Ratings Distribution
95%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
Most Liked Positive Review
Wheel for Hand Truck
I ordered this wheel to replace one of the wheels of my hand truck. We took the pins out of the old wheel and installed the new tire in about 1 minute. Very sturdy ...Read complete review
I ordered this wheel to replace one of the wheels of my hand truck. We took the pins out of the old wheel and installed the new tire in about 1 minute. Very sturdy tire. Have not used the hand truck since installing the new wheel. Hope the "load" works OK since both of my wheels are now different. If not I will order this very same tire again and both of my wheels will match.[...].
VS
Most Liked Negative Review
Terrible!
After they deflated because they ripped from the sides, I replaced my handtruck with the same wheels and the same problem occurred. Don't buy these wheels. I am only going to buy solid 10...Read complete review
After they deflated because they ripped from the sides, I replaced my handtruck with the same wheels and the same problem occurred. Don't buy these wheels. I am only going to buy solid 10" from now on.
Reviewed by 22 customers
Sort by
Displaying reviews 1-5
Previous | Next »
Pros
Cons
Best Uses
Comments about EZ Roll 10 inch Pneumatic Wheel:
These wheels/tires are made in [*], but appear to be of much better quality than those that came stock on my two-wheel dollys. I own three two-wheelers now, each purchased from a different place, and the tires on all three of them failed in less than a year. Every time I went to use one, it had a flat tire, and I was getting fed up with having to scramble to find a useable dolly when I needed one. I even filled them with Slime, but I was still having flats. Split rubber, bulges in the sides ... the stock tires were simply total junk. So I went looking for something of better quality that I could depend on, and I found these. They are made of 4-ply rubber, so the maximum inflation pressure on these is FIFTY PSI, not 30, like the cheaper ones. They roll much easier and can carry much more weight than the stock tires. They also have inner tubes with curved steel valve stems. They're easy to inflate, and with the 4-ply construction and inner tubes, I don't expect these will be going flat any time soon. The bearings look to be of good quality, and they fit all my dollys perfectly. They also have GREASE FITTINGS, so they can be lubricated without taking them off the dolly. All in all, they're a MAJOR improvement over the stock wheels. Of course, a pair of these will cost you almost as much as the dolly, but they aren't the most expensive ones out there either, and a tool is worthless if it doesn't work when you need it. So, if you have a two-wheel dolly with cheap wheels, do yourself a favor ... put a set of these wheels on it before the cheap ones drive you nuts, or worse yet, someone or something gets hurt.
Pros
Cons
Best Uses
Comments about EZ Roll 10 inch Pneumatic Wheel:
I use these wheels on carts that carry people. They work great! The ride is smooth with strong wheel bearings. The rims are made so that you can take them apart to replace tubes or tires which is a nice feature. Be sure to keep the bearings greased with wheel bearing grease to prevent wheel bearing from wearing out too quickly.
Pros
Cons
Best Uses
Comments about EZ Roll 10 inch Pneumatic Wheel:
This wheel worked out great, saved us $$ from buying a new one!
Pros
Cons
Best Uses
Comments about EZ Roll 10 inch Pneumatic Wheel:
I ordered this wheel to replace one of the wheels of my hand truck. We took the pins out of the old wheel and installed the new tire in about 1 minute. Very sturdy tire. Have not used the hand truck since installing the new wheel. Hope the "load" works OK since both of my wheels are now different. If not I will order this very same tire again and both of my wheels will match.[...].
Pros
Cons
Best Uses
Comments about EZ Roll 10 inch Pneumatic Wheel:
These new wheels made my 25 year old magliner hand truck operate like it did when new!
Displaying reviews 1-5
Previous | Next »
Have a question about this product? Ask a Product Expert! The answer will be emailed to you and then posted here.
